Ampair 100

Ampair Pacific 300

Ampair 600

Ampair UW 100


 


 

INVERTERS

PWT are able to supply the full range of Selectronic, Latronics and Fronius inverters. Please feel free to contact us with any
queries you may have regarding these products.


Shown - LS412 Wallmount
12 volt 400 watt continuous rating

Specifications coming soon
   
   

 

 

Selectronic Australia is proud to introduce the LD series of sine wave power inverters, incorporating the latest technology from Australia's leading inverter manufacturer.

Packed full of style, reliability and performance, these compact true sine wave inverters provide mains style power for those smaller applications wherever it is needed.

Simply connect the inverter battery leads to an appropriate battery or batteries in your car, mobile home, caravan or household power system and you're away. It's that simple.

These low cost, high performance Sine Wave inverters provide the convenience of use of 240 volt domestic appliances in an area where power is not normally available.

In a peaceful bush campsite, a remote outpost, on the water, or in your car or caravan, or household power system you can operate lights, kitchen appliances, television, power tools, etc.

Care must be taken to determine that the appliance usage does not exceed the output power or the output current of your LD inverter. Check the rating label on the appliance and compare this with the inverter output power that suits your needs in the specifications below.

Specifications:

PARAMETER LD200-12 LD250-24 LD350-12 LD350-24 LD450-12 LD550-24 LD600-12 LD700-24 CONDITION
Input voltage 12V 24V 12V 24V 12V 24V 12V 24V Nominal
Output Power @ 25C Ambient 200W 250W 600W 250W 320W 750W 350W 450W 1000W 350W 450W 1000W 450W 560W 1350W 550W 720W 1650W 600W 800W 1500W 700W 900W 200W Max Continuous
1/2 Hour Rating
Max Surge
Voltage DC Input Range 10 - 17V 20 - 34V 10 - 17V 20 - 34V 10 - 17V 20 - 34V 10 - 17V 20 - 34V Allowable Range
Input Current N/A 0.3A DC 20A DC 57A DC N/A 0.2A DC 12A DC 34A DC 0.06A DC 0.4A DC 34A DC 93A DC 0.05A DC 0.35A DC 15A DC 46A DC 0.06A DC 0.6A DC 45A DC 113A DC 0.06A DC 0.45A DC 27A DC 69A DC 0.06A DC 0.54A DC 60A DC 147A DC 0.03A DC 0.25A DC 32A DC 87A DC Stand By Inverter ON -
No Load
Max Continuous
Max Surge
Low DC Voltage Shutdown 11.0V DC Fixed 22.0V DC Fixed 10 - 11.5V 20 - 23V 10 - 11.5V 20 - 23V 10 - 11.5V 20 - 23V User Adjustable on LD350 to LD700
High DC Voltage Shutdown 17V 34V 17V 34V 17V 34V 17V 34V Fixed Setting
Output Current 0.83A AC 2.0A AC 1.04A AC 2.8A AC 1.4A AC 3.4A AC 1.4A AC 3.5A AC 1.9A AC 5.6A AC 2.3A AC 6.8A AC 2.4A AC 5.4A AC 2.8A AC 6.9A AC Max Continuous
Max Surge
Peak Efficiency 91% 93% 90% 92% 91% 92% 90% 93%  
Warranty 2 year parts and labour (Conditions apply)

 


Selectronic SE32

Selectronic SE/SA Range - Comprises three models 22, 32, 42.

SE/SA22 - 1300W 12V or 1600W 24V
SE/SA32 - 2400W 24V
SE/SA42 - 3600W 48V

The Selectronic SE32 sine wave inverter comes with many features not normally found in other inverters. An illuminated display on the front panel allows you to tailor your inverter to suit your needs, perform diagnostics, and take vital readings; no compromises needed. As if this is not enough, you also have the ability to upgrade to ENERGY MANAGEMENT Mk II as your needs develop. As you can see, there is now no need to limit the ability of your power system by the inability of your inverter.

No Compromise
All the vital parameters of the SE32 are fully adjustable making it compatible with any remote power system. These parameters are easily changed as required via the front panel which has an illuminated display to tell you what is being adjusted. No need to compromise your power system performance. Of course, all the settings are retained when the inverter is powered down.

Displays
The display on the front panel of the SE32 gives you vital information about your power system. You are able to display INVERTER STATUS, AC VOLTS, AC AMPS and BATTERY VOLTS.
Also the SE32 will alert you to the cause of any inverter shutdown by beeping an alarm and displaying a message containing the reason for the shutdown. As a shutdown occurs, the SE32 stores the cause of the shutdown in an ‘Alarm Log’ allowing you to view at a later date the cause of up to the last one hundred inverter shutdowns.
The SE32 will shutdown and protect itself if the battery volts are too high or too low, the load on the inverter is too high, or the temperature of the inverter becomes too high.
A set of diagnostic readings can also be accessed to assist in remote troubleshooting.

Specifications:

PARAMETER SE/SA32 Inverter CONDITION
Output Power @ 25 deg C Ambient 2400W
3700W
7000W
Max Continuous
1/2 Hour Rating
Max Surge
Output Power @ 40 deg C Ambient 2200W
3550W
7000W
Max Continuous
1/2 Hour Rating
Max Surge
Voltage Input Range 20-34V DC Range
Input Current 0.06A DC
0.70A DC
120A DC
350A DC
Stand By Inverter ON -
No Load
Max Continuous
Max Surge
Demand Start Sensitivity Response Time 3-30W 1 Second Max User Adjustable
Low Voltage Shutdown 19 - 23V DC User Adjustable
High Voltage Shutdown 30 - 34V DC User Adjustable
Output Voltage Adjustable from 220 to 240V AC +/- 4% @ Nominal DC Input, No Load to Full Load
Output Current 10A AC 28A AC Max Continuous Max Surge
Output Wave Shape Output Frequency Total Harmonic Distortion True Sine Wave 50Hz +/- 0.01% < 4%
Power Factor Limitations Nil
Input/Output Isolation 1875 V AC
Memory Retention Permanent
Operating Temperature Range -10 C to 50 C
Conforms to standards AS3100 (wiring), AS3108, AS1044 (EMC), C tick

 


Selectronic Wallmount Inverters

The Selectronic range of WM Sine Wave Inverters has in it's most basic form the normal Selectronic high standards of quality, reliability and performance all wrapped up in a simple and uncomplicated package.

Available in four models, the WM800-12 & WM1200-12, (12 Volt units) and the WM1000-24 & WM1500-24 (24 Volt units) all include superb Selectronic half-hour ratings and surge ratings (see specs below) and standard features such as adjustable demand start, low volts adjust, AC overload & temperature overload protection, status & alarm indicators.

With wall mount or bench mount ability, hard wire facility on all models, main DC breaker and a five year warranty, a Selectronic WM Sine Wave Inverter will please the most discerning of all purchasers.

But that is not where it ends. The WM inverter has a built in Serial Port Expansion Interface allowing the addition of options such as permanent remote Key Pad access, adjustment of inverter settings by either installer or owner via a temporary remote key pad application, access to remote energy management and future expansion.

Specifications:

PARAMETER WM1000-24 WM1200-12 WM1500-24 CONDITION
Input voltage 24V 12V 24V Nominal
Output Power @ 25C Ambient 1000W
1500W
3000W
1200W
1650W
3600W
1500W
2250W
4500W
Max Continuous
1/2 Hour Rating
Max Surge
Output Power @ 40C Ambient 900W
1400W
3000W
1100W
1550W
3600W
1400W
2100W
4500W
Max Continuous
1/2 Hour Rating
Max Surge
Voltage DC Input Range 20 - 34V 10 - 17V 20 - 34V Allowable Range
Input Current 0.05A DC
0.5A DC
45A DC
135A DC
0.05A DC
0.7A DC
116A DC
348A DC

0.05A DC
0.6A DC
70A DC
210A DC

Stand By Inverter ON -
No Load
Max Continuous
Max Surge
Low DC Voltage Shutdown 10 - 11.5V 20 - 23V 10 - 11.5V 20 - 23V User Adjustable
High DC Voltage Shutdown 17V 34V 17V 34V Fixed Setting
Output Current 3.3A AC
10A AC
4.2A AC
12.5A AC
5A AC
15A AC
6.25A AC
18.75A AC
Max Continuous
Max Surge

Latronics

Specifications available on request. CONTACT US


Precision Wind Technology.

Ph:  02-6679 1234
Fax: 02-6679 1634
Mobile: 0427-734 026
Email:
martypwt@bigpond.com

Last update10-12-2010